Easy tricks for toilet repairs

Who wants to have to deal with a running or plugged toilet? Toilet repair might seem simple on the surface, but you still have to figure what’s causing the problem.

Easy tricks for toilet repairs

With proper care, your toilet will last for many years. Just a little regular maintenance is all that is required to ensure it stays in good running order and to keep it from quitting on you at an inconvenient time. The main problems that can occur are a broken float ball mechanism, a rubber flapper valve that won’t close all the way, a flush handle that sticks, or a clogged toilet.

Regular inspection

To keep things running smoothly, usually all it takes is an occasional inspection of the parts and the replacement of those that have seen better days. But sometimes, in spite of your precautions, emergency repairs may still be required. In those cases, the plumber is the best person to call for any kind of toilet repair.

Simple toilet repairs

  • A malfunction of the tank mechanism often leads to a running flush. In this case, check the condition of the flapper valve. A worn flapper may allow water to get through even when it is closed. It is simple to replace.
  • The chain that links the flush valve to the flapper mechanism may be too long, preventing the flapper from closing properly. It can easily be shortened.
  • A running toilet can also be repaired by tightening or loosening the adjustable screw on the float rod. This either increases or decreases the water level. Give it a few tries until you get the proper setting.
  • A worn out float needs to be changed. It’s a good idea to check the float’s gasket.
  • Because several parts of the flushing mechanism are in direct contact with water, they are prone to rust. By regularly inspecting the screws and nuts, you will be able to see what condition they are in and replace them when required.
  • The flush handle, which triggers the tank to empty water into the toilet bowl, is another part inclined to break. You only need to open the tank and unscrew the part to remove it for replacement.

Clogged toilet

If you’re struggling with a clogged toilet, there are a few things you can check to help you solve the problem. If a few goes with the plunger gives you only temporary reprieve, then it might mean that there is a more serious problem that needs to be addressed. It might be that a pipe needs to be replaced or that there is a serious blockage in the system. The best thing is to bring in a plumber early on so you can avoid bigger problems down the road.

Ask for help

Constant trickling noises, condensation on the tank, and the pooling of water around the toilet base are all signs of a need for toilet repair. Although regular maintenance can be undertaken by the homeowner, other more challenging repairs definitely require the expertise of a professional. Don’t hesitate to call on your plumber to make sure that all your toilet repairs are done properly.

The material on this website is provided for entertainment, informational and educational purposes only and should never act as a substitute to the advice of an applicable professional. Use of this website is subject to our terms of use and privacy policy.
Close menu